Benchtop Membrane Filtration
With Vibro® Technology, you can recover up to 100% of API due to the fully drainable membrane modules.
Faster process development
The Vibro-LabEV is the ideal solution for benchtop filtration and process development. The unit fits different sizes of membrane modules, giving you a large span in working volume to work with.
The simplicity of the technology and the modest footprint of just 30 x 15 cm, means the Vibro-LabEV is easy to setup and fits in labs of all sizes.
Rethinking crossflow filtration
The SANI Membranes Lab-series is a unique and improved take on membrane filtration for laboratories and small productions compared to conventional filtration technologies like crossflow filtration / tangential flow filtration.
By applying turbulence to the membrane, rather than to the media itself, as you would see with conventional filtration technologies, you get a series of distinct advantages that only Vibro® Filtration offers.
Eliminate the risk of fouling
Without fouling, the membranes are kept open and clean. This means that you get a high transmission and enables you to run the process for a longer time and with a higher flux.
Uniform and low Trans Membrane Pressure (TMP)
Due to elimination of cross flow pumping, you get the unique feature of a fully uniform TMP, securing you an optimal, sharp separation.
This means that, when you are using Vibro® Technology solutions, you can work with true microfiltration while using less than 0.1 bar TMP, giving you complete process control and making it further ideal for laboratories and small scale productions.
Make your process development more flexible
The Vibro-LabEV can be equipped with either a Vibro-Lab280 or 2x Vibro-Lab35 modules. Thus, giving you the flexibility of switching between membrane types and membrane surface areas with just a few clicks.
Enhanced cell concentration
Fragile cells can be retained using Vibro® Technology, without indiciations of cell damage, decrease in viability or release Host Cell Proteins during filtration procedures of up to 8 hours. You can read more about using our technology for pharma and biotech here.
Lab280 Membrane Module
The Lab280 Membrane Modules are delivered in a wide range of membrane materials with pore sizes between 1 kDa and 1 µm.
Lab35 Membrane Module
The Lab35 Membrane Modules are delivered in a wide range of membrane materials with pore sizes between 1 kDa and 1 µm. For the Vibro-LabEV unit, Lab35 membrane modules are delivered in pairs.
Please fill in your contact information if you are interested in a demonstration trial and we will respond to you soonest possible.
When filling in the data form it is accepted to receive digital communications from SANI Membranes. In order to withdraw to the acceptance, you have to contact firstname.lastname@example.org